Assembly - Drive Medical ZOOME 3 Owner's Manual

VI. ASSEMBLY
Your scooter requires assembly prior to initial use. Please be sure to follow these steps
to properly set up your scooter.
Your scooter comes with the tool kit
pictured for the assembly process.
Step 1: Insert the front wheel assembly
into the scooter platform, slide both
bolts through the platform and attach
the nuts onto the threaded end of the
bolts. Secure the front wheel assembly
onto the platform by tightening the nut
and bolt assembly with the open-ended
wrenches that come in your tool kit.
Step 2: Insert the lower portion of the
handlebar assembly into the front wheel
assembly and secure it in place with the
6mm allen wrench.
ZooMe 3 Owner's Manual www.drivemedical.com
REV1.3.10.16
16