Table of Contents
Advertisement
WKG Series Full Size Gas Convection Ovens - ELECTRICAL OPERATION
4.
The display flashes HOLD as the oven enters
HOLD mode. This is also considered second
stage cooking (oven heating stops but product
continues to cook on residual heat).
A.
Convection fan motor is de-energized.
5.
After the oven temperature drops below 150°F,
the heat comes back ON and cycles as needed,
to maintain the "Hold" temperature of 150°F.
6.
The oven continues to cycle in this manner until
one of the following occurs:
A.
The ROAST & HOLD mode is turned OFF.
Cool Down Cycle (Computer Control Model)
1.
Conditions.
1)
D.
Power switch (S1) set to either ON or OFF.
2.
Power Switch (S1) turned to COOL DOWN.
NOTE: With door switch contacts OPEN (doors
open), the convection fan motor will still run and
continue to cool the oven.
A.
Power is connected through power switch
(S1) to the convection fan motor high speed
terminal.
1)
2)
3)
Page 55 of 74
Convection fan motor energized.
When Convection fan motor reaches
on the motor closes but no power is
available for connection to other
components.
The oven will continue to operate in
COOL DOWN mode until the power
switch (S1) is turned to the OFF or ON
position.
SCHEMATICS
F32700 Rev. B (0315)
Advertisement
Table of Contents
