Fakir RC1200 Instruction Manual page 9

How To Recharge Your Vacuum
Cleaner
CAUTION: Re-charge your unit only
with provided charging adaptor
1. Ho ld b rac ke t ag ain st w all to mark
loca tio n fo r scre ws. Ma ke sure the
wall bracket is positioned vertically,
with the charg er socke t at th e top.
2. Use a 6 mm drill for drilling holes for
the plastic anchors.
3 . I n s e t t h e a n c h o r s a n d d r iv e t h e
screws into both holes, leaving 6 mm
of each screw exposed.
4. Place the bra cke t ove r the scre ws
and slide th e bracke t d ownw ard to
a llo w th e s c re ws to mo ve in to th e
slots.
5 . T ig ht e n th e sc re w s t o s e cu r e th e
bracket.
6. P lu g the charg er into a n elec trica l
outlet.
7 . R e s t th e c le a n e r o n t h e d o c k in g
ledge, with the nozzle pointed down,
and push in on the top of the handle
until y ou hear ch arger socke t click
in to pla ce . T he c h arg ing in d ica tor
light on the vacuum will illuminate to
in dicate that the vacuum cleaner is
properly charging.
NOTE: CHARGE THE CLEANER FOR
10-12 HOURS BEFORE INITIAL USE.
THE BATTERIES OF A NEW CLEANER
ARE ON A LOW CHARGE.
Keeping Your Vacuum Cleaner Ready
For Use
Return your vacuum cleaner to the
recharging stand after every use. Firmly
position into the recharging stand ensuring
that the vacuum cleaner fits correctly onto
the contacts.
It will then be recharged and ready for
operation at all times.
The plug charger can be left in the electrical
outlet at all times. It is impossible to
overcharge the batteries. The plug charger
will become warm, however, this is not a
cause for concern.
9