Air Flow - Manuel Setting - airmaster CV 80 Operator's Manual

3.2.4.

Air Flow - Manuel Setting

auto
Press the current air flow. The automatic operating lock will cancel
when the air flow display is marked up to the current setting by blue
stripes.
auto
The same setting can be made by pressing the required air flow if the
automatic operating lock is not active.
auto
Drag your finger on the setting area
clockwise to increase air flow or
counter clockwise to reduce air flow.
The light will follow your movement.
Lift finger from the area when the
required air flow is shown. The cur-
rent setting will then be shown again
with a single blue stripe.
After 12 hours (time can be adjusted
to 0, 1, 2, ... 255 hours using a PC with
Airlinq Service Tool loaded) the unit
will return to automatic operation.
Lift finger from the area when the
required air flow is shown. The cur-
rent setting will then be shown again
with a single blue stripe.
8
_
+