Air Flow - Manuel Setting - airmaster CV 80 Operator's Manual

4.2.2.

Air Flow - Manuel Setting

auto
Cancel the operation lock or screen lock (if in use) and press the current
air flow until the air flow display is marked up to the current setting
with blue stripes.
auto
The same setting can be made by pressing the required air flow until the
air flow display is marked up to the required setting with blue stripes.
auto
Drag your finger on the setting area
clockwise to increase air flow or
counter clockwise to reduce air flow.
The light will follow your movement.
Lift finger from the area when the
required air flow is shown. The
current setting will then be shown
with 5 blue stripes.
After 12 hours (time can be adjusted
to 0, 1, 2, ... 255 hours using a PC
with Airlinq Service Tool loaded)
the unit will return to automatic
operation.
Lift finger from the area when the
required air flow is shown. The
current setting will then be shown
with 5 blue stripes.
12
_
+