Airlinq Bms - airmaster CV 80 Operator's Manual

4.2.6.

Airlinq BMS

When using Airlinq BMS with up to 20 air handling units
and 20 cooling modules, the system is usually broken down
into several groups (G) with at least one unit (ID) each, with
all units in a group controlled uniformly. One of the units in
a group will be programmed as the "Group Master", which
controls the entire group. Multiple sensors and a group
control panel can be linked to each group. The units can
also be equipped according to local conditions.
A system description is recommended.
Example:
Where installed Model
Room 101 AM 1200
Room 102 AM 500
Room 103 AM 300
Room 105 AM 500
Room 105 AM 500
Room 104 AM 800
Room 104 AM 800
Notes "Operation mode": Room 101 timer-control only starts on Wednesday and Friday. Room 102 runs Monday - Friday
07.00 to 16.00 and override depends on CO
runs during training and override depends on CO
auto
Serial number
Unit/cooling module
xxx
xxx
xxx
xxx and xxx
xxx and xxx
xxx and xxx
xxx and xxx
. Room 102 only runs if the room is in use. Rooms 104 and 105
2
.
2
auto
Options/Sensors
./.
CO , Viva
2
PIR, Viva
Cooling module, PIR, CO
2
Cooling module
Cooling module, PIR, CO
2
Cooling module
21
N
ID Remarks Group
0
Meeting room
1 Office 1
2 Office 2
3/103 Training
4/104 Training
5/105 Training
6/106 Training
Airlinq Orbit
Master
G0 ID0
G1 ID1
G2 ID2
G3 ID3
G3 ID3
G4 ID5
G4 ID5