Cleaning The Scanner Flex Cable; Clearing Supply Jams - Paxar TC6032EM Equipment Manual

Cleaning the Scanner Flex Cable

Occasionally, adhesive buildup
appears on the scanner flex
cable, as shown.
To clean the cable:
Turn off the printer and
1.
open the supply cover.
2. Clean the cable with 99%
isopropyl alcohol and a
cotton swab wherever
adhesive buildup appears.
3. Close the supply cover.
C l e a r i n g S u p p l y J a m s
To clear a supply jam:
Turn off the printer and open the supply cover completely.
1.
2. Open the label deflector by gently pressing down on it with two fingers.
3. Remove the supplies. See "Removing Supplies" in Chapter 3 for more
information.
Carefully remove any jammed supply and close the deflector.
4.
Note: Do not pull the jammed supply out through the front of the label
deflector. Do not use sharp objects to remove jammed supplies.
Carefully remove
5.
any jammed supply
between the pinch
and feed rollers.
Clean any adhesive
6.
buildup.
7. Reload the supply
and close the label
deflector.
Ad hesi ve Buildup
Scanner Flex
Cable
Feed Roller
(behind Pinch Roller)
Pinch Roller
Care and Maintenance 5-5