Caring For Your Printer; Reference Technical Information; General Specification; Cleaning The Roller - Paxar 9662 User Manual

Caring for your Printer

Before maintenance be sure to turn off the printer power.
1. Cleaning the print head(TPH)
Turn off the printer, open the cover, print head module and remove
the ribbon. Rub the print head with a piece of cotton which has
been moistened with alcohol. Check for any traces of black
coloring or adhesive on the cotton after cleaning. Repeat if
necessary until the cotton is clean after it is passed over the head.
Note :
The print head should be cleaned at least every time the ribbon is
replaced and more often depending on actual usage and conditions.

2. Cleaning the roller

Using a cotton moistened with alcohol, clean the roll and rip off the
attached glue.
Note :
The roller should be cleaned whenever it has been in contact with
foreign materials such as dust or adhesives.

3. Cleaning the media compartment

Clean the media compartment with cotton which has been
moistened with a mild detergent. Every time a media roll is printed
this compartment should be cleaned to reduce the incidence dust.
51

Reference Technical Information

1. General Specification

Specification
Print method Direct thermal and thermal transfer
Resolution 203 DPI ( 8 dots/mm)
Printing width Max 6.3" (160 mm), Max 6" (152mm) in cutter mode.
Printing length 1" ~ 30" (25mm ~ 1143mm)
Printing speed 2~6 ips (51~152 mm/s)
Memory 2Mb DRAM, 1Mb Flash ROM
CPU type 32 bit RISC Microprocessor
Media sensor Reflective and see-though Transmissive
Display LCD display, 2-line
Centronics parallel, RS-232 serial
Communication
interface
Maximum label 8 in.(203 mm) outside diameter
roll diameter 1.5 in. ~ 3.0 in.(38 mm ~ 76 mm) inside diameter
Media type Roll-feed, die-cut, continuous, fan-fold, tags, ticket in
thermal paper or plain paper.
Label indexing Black stripe and gap
Ribbon types Wax, Wax/resin and Resin ; Coating inside
Ribbon size OD 2.5 in. (63mm)
ID 1 in. (25 mm)
Compact size W12.1" H10.2"
╳
Weight 32Ibs ( 14.5kg )
Power source 110/220 VAC + 10%, 50/60 Hz
Agency listing CE, UL, CUL, FCC class A
Operating 40° ~ 100°F (4° ~ 38°C)
temperature 10~90% non condensing
Storage -40°F ~ 140°F (-4°C ~ 60°C)
temperature
Model 9662
16, LED indicators 3
X X
L17.3" (W310 H260 L445 mm)
╳ ╳ ╳
52