Avery Dennison Monarch 9433 Sierra Sport3 Operator's Handbook Manual page 36

Error
758
Check Supply
762
Low Battery
763
Remove Label
765
Check
Printhead
768
Check
Printhead
791
Error Pending
If you see a System Error Vector ## on the display,
call Service for instructions. If you need to return the
printer to Paxar, use the original packaging.
4-4 Operator's Handbook
Description
Either the supply is not seen or the on-
demand sensor is broken. Press A
under x to clear the error. Check for a
label jam, clear the supply path, or
reload supplies. This error may occur if
you remove a label too quickly in on-
demand mode. The printer does not
recalibrate after this error.
Recharge the battery. Press A under x
to clear the error.
Waiting to dispense label. Press A
under x to clear the error.
The printhead has less than four bad
dots. The printer can shift bar code
fields to avoid bad dots. Press A under
x to clear the error and continue printing.
Printhead has more than 10 bad dots or
is not connected. Connect the printhead.
Press A under x to clear the error.
The printer has an error pending. Turn
off the printer. Wait 15 seconds and turn
it back on. Resend the packets.