Avery Dennison Monarch 9433 Sierra Sport3 Operator's Handbook Manual page 35

Error
704
Check Supply
750
Hot Head
751
Check Supply
752
Check Supply
753
Check Supply
756
Load Supplies
757
Load Supplies
Description
Printer has not sensed a supply mark
within the specified number of inches
or is out of supplies. Check the supply
tracking, supply marks, black mark
sensor position, and supply roll for
binding. Press A under x to clear the
error. Change supply.
Printhead is overheated. Press A
under x to clear the error. Turn off the
printer to let the printhead cool.
If error persists, call Service.
Printer did not sense a black mark
when expected. For errors 751-753,
Check the supply tracking, supply
marks, black mark sensor position, and
supply roll for binding. Press A under
x to clear the error and try to continue
printing the batch. Change supply.
Printer sensed a mark in the wrong
place. Press A under x to clear the
error.
Printer sensed a mark that is too long.
Press A under x to clear the error.
Load supplies. Press A under x to
clear the error.
Load supplies (supply length
mismatch), because the calibrated
supply length differs by plus or minus
0.25 inches from the format. Press A
under x to clear the error.
Troubleshooting 4-3