Replacing The Oven Light; Oven Floor; Storage Compartment - DeLonghi DEFV908R Use And Care Instructions Manual

Table of Contents

Advertisement

REPLACING THE OVEN LIGHT

WARNING: Ensure the appliance is switched off before replacing
the lamp to avoid the possibility of
electric shock.
Let the oven cavity and the
heating elements to cool down.
Disconnect the appliance from
the electrical power supply.
Remove the protective cover "A"
(fig. 46).
Replace the halogen lamp "B"
with a new one suitable for
high temperatures having the
following
specifications
240V or 230-240V, 50Hz, and
same power (check watt power
as stamped in the bulb itself) of
the replaced lamp.

IMPORTANT
Never replace the bulb with
bare hands; contamination
from your fingers can cause
premature failure.

Always use a clean cloth or
gloves.
Refit the protective cover "A".
NOTE: Oven bulb replacement is not
covered by your guarantee.

OVEN FLOOR

The oven floor "F" (fig. 47) can be
easily removed to facilitate cleaning.
Remember to replace the floor
correctly afterwards.
Be careful not to confuse the tray "L"
with the oven floor "F".

STORAGE COMPARTMENT

The storage compartment is accessible
through the pivoting panel (fig. 48).
flammable material in the storage
compartment.
44
220-
WARNING:
Do
not
store
Figure 46
B
WRONG
A
CORRECT
Figure 47
L
F
Figure 48

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the DEFV908R and is the answer not in the manual?

Questions and answers

This manual is also suitable for:

Defv908crDefv908bk

Table of Contents