GAS AND ELECTRIC CONNECTION
FITTING THE ADJUSTABLE FEET
The adjustable feet must be fitted to the base of the cooker before use (figs. 3, 4).
Rest the rear of the cooker on a piece of the polystyrene packaging exposing the base for
the fitting of the feet.
Fit the no. 4 (four) legs by screwing them tight into the support base as shown in figure 4.
LEVELLING THE COOKER
The cooker may be levelled by screwing the lower ends of the feet IN or OUT (fig. 5).
Figure 3
10
Figure 2
Figure 4
Dotted line
showing the
position of the
cooker when
installed
Area for GAS
and ELECTRIC
connection
Figure 5
Need help?
Do you have a question about the DEFV908R and is the answer not in the manual?
Questions and answers