FIXING THE BACKGUARD
Before installing the cooker, assemble the
backguard "C" (fig. 6).
■
The backguard "C" can be found
packed at the rear of the cooker.
■
Before
assembling
protective film/adhesive tape.
■
Remove the two spacers "A" and the
screw "B" from the rear of the cooktop.
■
Assemble the backguard as shown in
fig. 6 and fix it by screwing the central
screw "B" and the spacers "A".
MOVING THE COOKER
WARNING: When raising cooker to upright
position always ensure two people carry
out this manoeuvre to prevent damage to
the adjustable feet (fig. 7a).
WARNING - Be carefull: Do not lift the
cooker by the door handle when raising to
the upright position (fig. 7b).
WARNING: When moving cooker to its
final position DO NOT DRAG (fig. 7c). Lift
feet clear of floor (fig. 7a).
Figure 7b
remove
any
Figure 6
Figure 7a
Figure 7c
11