Cleaning; Cleaning The Blender - Silvercrest SSM 550 D1 Operating Instructions Manual

Cleaning

GB
CY

Cleaning the blender

12
RISK OF ELECTRIC SHOCK!
Before starting to clean the blender and its components:
► Ensure that the motor is switched off and the power plug removed from the
socket.
Do not immerse the motor block
could result in you receiving a fatal electric shock and cause damage
to the appliance.
► Never open the housing of the appliance. Otherwise, there is a risk of a
fatal electric shock.
WARNING! RISK OF INJURY!
► Never disassemble the cutting blades
The cutting blades
CAUTION – PROPERTY DAMAGE!
► Do not use solvents or abrasive cleaners on the plastic surfaces, they could
be damaged by them.
■ To prevent injuring yourself on the cutting blades
with a long-handled washing-up brush.
■ In a case of stubborn soiling, the blender
washer. To do this, always remove the blender
■ Clean the lid and the measuring cap
normal washing up.
in water or other liquids. This
and never reach into the blender
are extremely sharp!
can also be cleaned in a dish-
in a dishwasher or with the
, clean the blender only
, as described later.
SSM 550 D1
.