Table of Contents
Advertisement
6. Decide if you want to see this prompt in Batch Entry mode
and press either
. You will see
7. Decide if you want to change the default setting of one (1)
and press either
. If you select "Yes," you will see
8. Select the number of parts to print across the supply by
pressing
number. Press
What you see next depends on if you have a knife installed.
Without a knife, the next prompt you see is for Print Multiple.
With a knife installed, you will see
9. Decide if you want to see this prompt in Batch Entry mode
and press either
. You will see
10. Decide if you want to change the default and press either
or
to display your selection. Press
or
to display your selection. Press
Number of parts
Default? No
or
to display your selection. Press
Number of parts
[1/5]: +1
to increase the number or
. The range is one through five.
Cut Option
Prompt? Yes
or
to display your selection. Press
Cut Option
Default? No
Cut Option
No
to decrease the
. You will see
Setting Format Options 6-3
Advertisement
Table of Contents
