Table of Contents
Advertisement
S p e e d
You can change the print speed for bar codes or graphics. If you
select "default" for speed, formats with serial bar codes
automatically print at 2.5IPS. Other formats print at 6.0IPS.
Refer to the following table for maximum print speeds for your
printer.
Printer
9835
9840
9850
To change the setting, from the Main Menu, select Setup, then
Supply. Then, follow these steps.
1. Press
2. Press
setting, for example:
3. Press
option you want, press
Main menu.
2-10 Setting Supply Options
Maximum Print Speed
6.0 ips
8.0 ips
10.0 ips (thermal direct only)
NOTE: 203 dpi serial bar codes with narrow elements
3 dots (or greater) can be printed at 4.0 ips. For
additional high speed printing information, refer to your
9850 Operator's Handbook.
or
until you see
to set the speed option. You will see the current
or
to see the other options. After you display the
SUPPLY
Speed
SPEED
6.0 IPS
. Press
twice to exit to the
Advertisement
Table of Contents
