Table of Contents
Advertisement
Print too far to the left.
If the data is too close to the left side, increase the number.
If the data is too close to the right side, decrease the number.
Changing this setting only affects new
To change the setting, from the Main Menu, select Setup, then
Supply. Then, follow these steps.
1. Press
or
2. Press
. You will see the current setting, for example:
3. Press
or
decreases the value (moves the image toward the left side of
the supply);
side of the supply).
Print too far to the right.
formats sent to the printer.
until you see
SUPPLY
Margin Pos
Enter margin pos
[-99/99]: +0
to change the margin position. Pressing
increases it (moves the image toward the right
Setting Supply Options 2-7
Advertisement
Table of Contents
