Setting Supply Options - Paxar Monarch 917 Operating Instructions Manual

S E T T I N G S U P P L Y O P T I O N S
This chapter explains how to select a ribbon, separators, feed
mode, print position, supply position, margin position, cut position,
supply type, speed, backfeed, and verifier options.
CANCEL PRINT
ALL MODE
SEPARAT- FEED
RIBBON
ORS MODE
You may need to set supply options when you change supplies.
The options are listed in the table below.
Option
Ribbon
Separators
Feed Mode
Print Position
Supply Position
Margin Position
Cut Position
Supply Type
Speed
Backfeed
Verifier
MAIN MENU
BATCH REPEAT
ENTRY BATCH
SUPPLY CONTRAST DEFAULTS
PRINT SUPPLY
POS POS
Choices
No/Yes/High Energy
No/Yes/Long
Continuous/On-Demand
-99 to +99
-300 to +300
-99 to +99
-300 to +300
Aperture/Die Cut/Black
Mark/Continuous
2.5/4.0/6.0/8.0/10.0/Default
Off/On/Extended
Disabled/Enabled
FORMAT
SETUP
OPTIONS
PORT
SETTINGS
MARGIN CUT
POS POSITION
DIAG.
SUPPLY
SPEED BACKFEED
TYPE
Default
Yes
No
Continuous
0
0
0
0
Die Cut
Default
Off
Disabled

Setting Supply Options 2-1

2
VERIFIER