Table of Contents
Advertisement
S u p p l y Ty p e
You can print on aperture, black mark, die cut, or continuous
supplies. You have to tell the printer which supplies you are
using.
If you are using edge aperture supplies, use
the die cut setting. If you are using center
aperture supplies, use the aperture setting.
To change the setting, from the Main Menu, select Setup, then
Supply. Then, follow these steps.
1. Press
or
2. Press
current setting, for example:
3. Press
or
option you want, press
Main menu.
until you see
SUPPLY
Supply Type
to set the supply type option. You will see the
SUPPLY TYPE
Black Mark
to see the other options. After you display the
. Press
twice to exit to the
Setting Supply Options 2-9
Advertisement
Table of Contents
