Table of Contents
Advertisement
To change the setting, from the Main Menu, select Setup, then
Supply. Then, follow these steps.
1. Press
or
2. Press
. You will see the current setting, for example:
3. Press
or
decreases the value (moves the image down);
(moves the image up).
4. Press
twice to exit to the Main menu.
S u p p l y P o s i t i o n
This function adjusts how much supply feeds out of the exit chute.
You may need to adjust the supply in or out to allow
tags and labels to be removed.
die cut labels to be removed easily.
The adjustments are in dots (0.0049 inch).
until you see
SUPPLY
Print Pos
Enter print pos
[-99/99]: +0
to change the print position. Pressing
when the number you need appears. Press
increases it
Setting Supply Options 2-5
Advertisement
Table of Contents
