Table of Contents
Advertisement
3. Press
option you want, press
Main menu. You can only enable or disable
backfeed/extended backfeed. You cannot set the backfeed or
dispense position. Your System Administrator should refer to
the optional Packet Reference Manual to set the backeed or
dispense position.
V e r i f i e r
The verifier scans and checks the quality of bar codes as they are
printed. The optional verifier must be purchased separately.
To change the setting, from the Main Menu, select Setup, then
Supply. Then, follow these steps.
1. Press
2. Press
setting, for example:
3. Press
option you want, press
Main menu. For additional verifier information, refer to your
verifier's manual.
2-12 Setting Supply Options
or
to see the other options. After you display the
This option only appears if you are using a
9850 printer.
or
until you see
SUPPLY
Verifier
to set the verifier option. You will see the current
VERIFIER
Disabled
or
to see the other option. After you display the
. Press
twice to exit to the
. Press
twice to exit to the
Advertisement
Table of Contents
