Table of Contents
Advertisement
1- 28
FEATURES OF YOUR HYUNDAI
B230B02A-GAT
Using a Child Restraint System
with "Tether Anchorage" Sys-
tem
Holder Bolt (5/16"-30 mm)
Washer, Conical Spring
Holder, Child Restraint Hook
Spacer (10mm), Child
Restraint Hook Holder
Retainer Washer
For small children and babies, the use
of a child seat or infant seat is strongly
recommended. This child seat or infant
seat should be of appropriate size for
the child and should be installed in
accordance with the manufacturer's in-
structions. It is further recommended
that the seat be placed in the vehicle's
rear seat since this can make an impor-
tant contribution to safety. Your vehicle
is provided with three child restraint
hook holders for installing the child seat
or infant seat.
B230E02FC-GAT
Securing a Child Restraint Sys-
tem with "Tether Anchorage"
System
Three child restraint hook holders are
located on the vertical back panel.
(behind rear bumper bar)
1. Route the child restraint seat strap
over the seatback.
For vehicles with adjustable head-
rests, route the tether strap under
the headrest and between the head-
rest posts, otherwise route the tether
strap over the top of the seatback.
B230B01TB
Covering shelf
Attaching clip
Back panel
Front of Vehicle
2. Remove the load space cover.
3. Connect the tether strap hook to the
child restraint hook holder and tighten
to secure the seat.
B230E01TB
Advertisement
Chapters
Table of Contents
