Hyundai Getz 2004 Owner's Manual page 403

6- 12
DO-IT-YOURSELF MAINTENANCE
1. Park the vehicle on level ground and
ensure that the parking brake is firmly
applied, and the engine allowed to
cool.
Do not attempt this operation whilst
the engine is hot since burning or
scalding may result.
2. Prepare a suitable receptacle to col-
lect the displaced coolant and posi-
tion this under the radiator drain tap.
3. With the heater temperature control
set to the "HOT" position, remove
the radiator cap and open the radiator
drain tap.
4. When the engine coolant has drained
completely, close the drain tap en-
suring that this is not over tightened.
tbuk-6.p65 12
5. Prepare a suitable quantity of new
engine coolant (refer to section 9)
and pour this into the radiator.
6. Start the engine with the radiator cap
still removed and continue to add
coolant as the level decreases as air
is expelled from the system. When
the level remains constant, replace
the radiator cap and replenish the
coolant reservoir.
7. When the engine is hot, check to
ensure that no coolant leaks are
present.
HTB171
!
WARNING:
The cooling fan is controlled by en-
gine coolant temperature and may
sometimes operate even when the
engine is not running. Use extreme
caution when working near the
blades of the cooling fan so that you
are not injured by a rotating fan
blade. As the engine coolant tem-
HTB172 perature decreases, the fan will auto-
matically shut off. This is a normal
condition.
3/23/04, 4:26 PM