Table of Contents
Advertisement
C090H01A-EAT
NOTE:
o The brake pedal should be de-
pressed when shifting from NEU-
TRAL to a forward or reverse
gear.
o The brake pedal fully depressed
in order to move the shift lever
from the "P" (Park) position to
any of the other positions.
o It is always possible to shift from
"R", "N", "D", "2", "L" position.
tbuk-2.p65
11
C090I02A-EAT
!
CAUTION:
o Shift into "R" and "P" only when
the vehicle has completely
stopped.
o Do not accelerate the engine in
reverse or any of the forward
positions with the brakes applied.
o Always apply the footbrake when
shifting from "P" or "N", to "R",
"D", "2" or "L" position.
o Do not use the "P" (Park) posi-
tion in place of the parking brake.
Always set the parking brake,
shift the transaxle into "P" (Park)
and turn off the ignition when
you leave the vehicle, even mo-
mentarily. Never leave the vehicle
unattended whilst the engine is
running.
o Check the automatic transaxle
fluid level regularly, and add fluid
as necessary.
See the maintenance schedule
for the proper fluid recommen-
dation.
DRIVING YOUR HYUNDAI
FC120D1-E
General Operating Instructions
o The button in the selector handle
must be depressed before the se-
lector can be moved.
o The engine may only be started
when the selector is at position "P"
or "N".
o Ensure that the footbrake is firmly
applied when shifting from "P" or
"N" to "D", "2", "L" or "R" and vice
versa.
o Always engage the parking brake
when the vehicle is unattended,
never use the "P" position in place of
the parking brake.
o Under normal circumstances, the
selector should be placed in the "D"
position and the transaxle allowed
to select the most ideal ratio for the
circumstances. In this position maxi-
mum fuel economy will be achieved.
o When descending steep gradients
where engine braking is required,
the selector should be placed at the
"2" or "L" position depending upon
the vehicle speed.
3/23/04, 4:55 PM
2- 11
Advertisement
Chapters
Table of Contents
