Checking The Transaxle Fluid (Automatic) - Hyundai Getz 2004 Owner's Manual

Hide thumbs Also See for Getz 2004:
Table of Contents

Advertisement

G100B02A-AAT
To Check the Maunal Transaxle
Fluid Level
Park the car on level ground with the
engine off.
1. Using a wrench of the correct size,
loosen the oil filler plug by turning it
counterclockwise and remove it with
your fingers.
2. Use your finger or suitable tool to
feel inside the hole. The oil level
should be at its bottom edge. If it is
not, check for leaks before adding
oil. To refill the transaxle or bring the
oil level up,add oil slowly until it
reaches the proper level. Do not
overfill.
3. Replace the plug and washer, screw
it in with your fingers and then tighten
securely with the wrench.
G110A01A-AAT
CHECKING THE TRANSAXLE
FLUID (AUTOMATIC)
Transaxle fluid in the automatic
transaxle should be checked at those
intervals specified in the vehicle main-
tenance schedule in Section 5.
G100B01L
G110B03A-AAT
Recommended Fluid
Your Hyundai automatic transaxle is
specially designed to operate with DIA-
MOND ATF SP-III or SK ATF SP-III.
Damage caused by a nonspecified
fluid is not covered by your new vehicle
limited warranty.
DO-IT-YOURSELF MAINTENANCE
G110C01TB-GAT
Transaxle Fluid Capacity
The fluid capacity of the automatic
transaxle is 6.1 liters.
!
WARNING:
The transaxle fluid level should be
checked when the engine is at nor-
mal operating temperature. This
means that the engine, radiator,
exhaust system etc., are very hot.
Exercise great care not to burn your-
self during this procedure.
6- 19

Advertisement

Table of Contents
loading

Table of Contents