Table of Contents
Advertisement
2- 4
DRIVING YOUR HYUNDAI
SC050A2-E
KEY POSITIONS
!
WARNING:
The engine must never be turned
off and the key removed from the
ignition key cylinder whilst the ve-
hicle is in motion since the steering
lock will operate and control of the
vehicle will be lost.
ACC
LOCK
tbuk-2.p65
4
"START"
The engine is started in this position. It
will crank until you release the key.
NOTE:
Do not hold the key in the "START"
position for more than 15 seconds.
"ON"
When the key is at the "ON" position,
the ignition and all accessories are
available for use. If the engine is not
running, the key should not be left at
this position since the battery will be-
come discharged and damage to the
ignition system may also result. For
ON
information regarding engine starting,
refer to "STARTING THE ENGINE".
"ACC"
START
When the ignition key is at the "ACC"
position, the radio and other accesso-
ries may be used.
C040A01E
"LOCK"
The ignition key may only be inserted
or removed at this position.
SB050B1-E
STEERING WHEEL LOCK
When the key is removed, the steering
column lock will be activated and will
engage when the steering wheel is
turned to the appropriate position. It is
not necessary to turn the wheel until
locked each time the key is removed
since in the event of any unauthorized
attempt at removal, the lock will be-
come effective as soon as the steering
wheel is turned. To unlock the steer-
ing, insert the key and turn to the
"ACC" position. If the steering is locked,
it may be necessary to rock the steer-
ing wheel slightly to facilitate turning
the key. Under no circumstances
should the key be forced since break-
age of the key will occur.
3/23/04, 4:55 PM
Advertisement
Chapters
Table of Contents
