Hyundai Getz 2004 Owner's Manual page 36

will also lock if you try to lean forward
too quickly. Check to make sure that
the belt is properly locked and that the
belt is not twisted.
B200A01S-GAT
Adjusting Your Seat Belt
You should place the belt as low as
possible on your hips, not on your
waist. If the belt is located too high on
your body, you could slide under it in
case of accident or a sudden stop.
This could result of death, serious
injury or property damage. Both arms
should not be under or over the
belt. Rather, one should be over and
the other under, as shown in the illus-
tration.
Never wear the seat belt under the arm
nearest the door.
B210A01A-AAT
To Release the Seat Belt
The seat belt is released by pressing
B200A01L
the release button in the locking buckle.
When it is released, the belt should
automatically draw back into the re-
tractor.
If this does not happen, check the belt
to be sure it is not twisted, then try
again.
FEATURES OF YOUR HYUNDAI
B220A01A-AAT
SEAT BELTS (2-Point Static
Type) (Rear Seat Center)
(If Installed)
To Fasten Your Seat Belt
B210A01L
To fasten a 2-point static type belt,
insert the metal tab into the locking
buckle. There will be an audible "click"
when the tab locks into the buckle.
Check to make sure the belt is properly
locked and that the belt is not twisted.
1- 23
HTB225