Hyundai Getz 2004 Owner's Manual page 115

1- 102
FEATURES OF YOUR HYUNDAI
H290F01O-GAT
1. CD Select Button
o Insert the CD with the label facing
upward.
o Insert the CD to start CD playback,
during radio operation or cassette
tape playing.
o When a disc is in the CD deck, if you
press the play button the CD player
will begin playing even if the radio or
cassette player is being used.
o The CD player can be used when
the ignition switch is in either the
"ON" or "ACC" position.
2. FF/REW ( / )
If you want to fast forward or reverse
through the compact disc track, push
and hold in the FF ( ) or REW (
button.
When you release the button, the com-
pact disc player will resume playing.
3. TRACK UP/DOWN
o The desired track on the disc cur-
rently being played can be selected
using the track number.
o Press button once to skip forwa-
rd to the beginning of the next track.
Press button once to skip back
to the beginning of the track.
4. REPEAT
o To repeat the music you are listen-
ing to, press the RPT button. To
cancel, press again.
o If you do not release RPT operation
when the track ends, it will automati-
cally be replayed.
This process will be continued until
you push the button again.
)
5. EQUALIZER Button
Press the EQ button to select the
CLASSIC, JAZZ, ROCK and DEFEAT
MODE for the desired tone quality.
Each press of the button changes the
display as follows;
CLASSIC → JAZZ → ROCK → DEFEAT
↑
6. CD EJECT Button
When the button is pressed with the
CD loaded, the CD is ejected.
7. SCAN Button (If installed)
o Press the SCAN button to playback
the first 10 seconds of each track.
o Press the SCAN button again within
10 sec. for the desired track.
NOTE:
o To assure proper operation of
the unit, keep the vehicle interior
temperature within a normal
range by using the vehicle's air
conditioning or heating system.
o When replacing the fuse, replace
it with a fuse having the correct
capacity.
o The preset station frequencies
are all erased when the car bat-
tery is disconnected. Therefore,
all data will have to be set again
if this should occur.
o Do not add any oil to the rotating
parts. Keep magnets, screwdriv-
ers and other metallic objects
away from the tape mechanism
and head.