Font Modification; Configuring The Printer; Using The Magnetic Card Reader - Paxar 9430RX Programmer's Manual

F o n t M o d i f i c a t i o n
Syntax
ESC DAO
ESC DX <charfont>
ESC D <font> <code>
<matrix>
C o n f i g u r i n g t h e P r i n t e r
Syntax
ESC P^
ESC P <value>
ESC Mnn0 CR
ESC C
ESC P!
ESC P(
ESC P)
CTRL B
CTRL V
U s i n g t h e M a g n e t i c C a r d R e a d e r
Syntax
ESC M' #timer#
<tracks> CR
Printer Action
Selects characters from the ASCII character
set.
Selects extended characters from the PC Line-
Draw or International character sets.
Loads a character at a particular position.
Printer Action
Prints the battery voltage.
Sets the power mode (when <value> is hex).
Sets the print contrast (when <value> is
decimal).
Sets the power down timer to nn seconds
(000 = disable timer).
Resets auto power down to 20 seconds.
Requests the printer's battery voltage.
Queries the printer firmware version.
Queries the printer hardware model.
Print status request for buffer and magnetic
card reader.
Battery status request for buffer, battery
voltage, and magnetic card reader.
Printer Action
Prepares the reader for a card swipe.
Quick Reference A-3