ESC
'cmdbbw'
<max>
Printer Responses
See the printer's response to the black mark commands in the following table.
Command
ESC QR39
ESC-'Q'-3F hex-3F hex-#high#-#low#
ESC QB35
ESC-'Q'-30 hex-30 hex-#high#-#low#
#high#
#low#
C h e c k i n g V e r s i o n I n f o r m a t i o n
You can check the versions of both the printer's hardware and firmware.
Syntax
ESC-'cmdfv'
ESC-'cmdhv'
ESC
'cmdfv'
ESC
'cmdhv'
2-6 Configuring the Printer
Starts the command language.
Search for black mark backward command.
Enter QB.
The maximum number of lines to move backward
in 0.25mm line increments (in 00 hex – FF hex).
Response
The left digit of the hex number representing the
number of lines moved to find the black mark in
30 hex – 3F hex.
The right digit of the hex number representing the
number of lines moved to find the black mark in
30 hex – 3F hex.
Starts the command language.
Request firmware version command. Enter P(.
Starts the command language.
Request hardware version command. Enter P).
Description
Black mark found.
Black mark not found