Positioning Fields - Paxar 9430RX Programmer's Manual

P o s i t i o n i n g F i e l d s
You may need to use some of these supply positioning control characters to
position the fields on the format. The data stream can also write spaces to the
printer before it prints text to position a field.
You can also change the line spacing between lines or before a line. See
"Selecting the Line Spacing" in this chapter for more information.
NOTE: There are .157-inch no-print zones on the left and right sides of the
format, and a .7-inch no-print zone at the top of the format.
Char. Hex
CR 0x0D
LF 0x0A
FF 0x0C
NORM 0x14
SI 0x0F
SO 0x0E
HT 0x09
VT 0x0B
3-12 Creating and Printing Formats
Control Action
Carriage Return - Advances to beginning of next line.
Line Feed - Advances to beginning of next line.
Form Feed - Advances 10 lines.
Switches to 57-column print mode.
Shift In - Switches to 57-column print mode.
Shift Out - Switches to 36-column print mode
Horizontal Tab - Advances to the next tab position (from
the following list) or to the beginning of the next line:
5, 9, 13, 17, 21, 25, 29, 33, 37.
Vertical Tab - Advances 5 lines.