AGFA CR 30-X Service Manual page 84

DD+DIS125.08E
2 CR 30-X System Upgrade References
In case an upgrade is planned the following list provides references with details on how to
upgrade the respective CR 30-X System components.
Upgrade possibilities for NX Workstation Software:

NX 2.0 - Service Bulletin No. 19 - Software Update NX 2.0.6805 SU2 solves Software
Defects

NX 2.0.8400 - 3.0.8400 - Service Bulletin No. 01, DD+DIS254.10E,
Release of NX 2.0.8400 - 3.0.8400
(Intranet link
Upgrade possibilities for CR 30-X Digitizer Software:

CR 30-X – Service Bulletin No. 44, DD+DIS308.10E, Software CRE_1901 and new
Digitizer Subtypes available
Upgrade to FLFS application for already installed CR 30-X Systems:

CR 30-X - Service Information Bulletin No. 20, DD+DIS329.07E, Software CRE_1405
released to support FLFS Cassette and "White Label Digitizer",
(Intranet link
The controlled version of this document resides on MedNet. Any printed copy of this document is uncontrolled.
Edition 1, Revision 5
01-2011
Software / Hardware Compatibility Chart CR 30-X System
(Intranet link / Extranet
/ Extranet link)
(Intranet Link
/ Extranet link)
DOCUMENT CONTROL NOTE:
Type 5175/100/105/110/120/125
Functional Description
link)
/ Extranet
CR 30-X
Link)
Chapter 2 / 10
Agfa Company Confidential