Delta Childrens Products 64015 Instructions Manual page 8

SECTION 1: CRIB ASSEMBLY
STEP 3
PARTS AND TOOLS REQUIRED TO COMPLETE STEP
FROM STEP 2
ATTACH THE MATTRESS SUPPORT (PART K) IN ALL CORNERS USING (1) M6x15 mm BOLT
(PART P) IN EACH CORNER. TIGHTEN WITH THE M4 ALLEN WRENCH.
UP
K
M4 ALLEN WRENCH
SUPPLIED
P. M6 x15 mm BOLT x 4
!
THE WARNINGS PRINTED ON THE POUCH ATTACHED
TO THE MATTRESS SUPPORT MUST FACE UP, THE
SPRINGS MUST FACE UP.
THIS CRIB HAS (3) ADJUSTMENT POSITIONS, USE THE
HIGHEST ONLY FOR NEW BORNS, MOVE THE
MATTRESS DOWN AS THE CHILD GROWS.
!
FALL HAZARD: WHEN CHILD IS ABLE TO PULL TO A
STANDING POSITION, SET MATTRESS TO LOWEST
POSITION AND REMOVE BUMPER PADS, LARGE TOYS
AND OTHER OBJECTS THAT COULD SERVE AS STEPS
FOR CLIMBING OUT.
! WARNINGS ON POUCH MUST FACE UP.
K. MATTRESS SUPPORT x 1
WARNING:
P
ALL CORNERS
8