Table of Contents
Advertisement
The Model 571/81 series surge protectors have been designed to
conform to stringent EIA/TIA TSB-40 standards as required for all
Category-5 connecting hardware. These standards specify the
capacitance and near end cross-talk (N.E.X.T) to insure proper
operation of ALL connected equipment. Specific test results are shown
in the tables on the following pages*.
*Note:
All test results are for the Model 571/581 alone, not
including the standard 6" (15.25cm) patch cable that is
shipped with the unit.
APPENDIX B
EIA/TIA TSB-40A COMPLIANCE
9
Advertisement
Table of Contents
