Page 1
USER MANUAL MODEL 503P & 503PC Parallel Surge Protectors Part# 07M503P-C SALES OFFICE Doc# 074201U (301) 975-1000 Rev. D TECHNICAL SUPPORT Revised 1/21/08 C E R T I F I E D (301) 975-1007 An ISO-9001 http://www.patton.com Certified Company...
Page 2
Patton Electronics' technical staff is also available to answer any questions that might arise concerning the installation or use of your Patton Model 503P and 503C. Technical Service hours: 8AM to 5PM EST, Monday through Friday. 1.3 CE NOTICE...
Page 3
Both units divert surge energy to chassis ground through the metal connector shell. For complete protection of your parallel line, we recommend that a Model 503P and 503PC be used together, one at each end of the line. Warning: These products will not provide complete protection should your equipment be subject to a direct lightning hit.
Page 4
3.0 INSTALLATION Patton's Model 503P and 503PC units are simple to install, and require no user configuration. Follow these installation steps. Turn off your PC/printer’s power and disconnect the power cord(s) from the wall outlet(s). Unplug (disconnect) the existing connection between the parallel cable and your PC/printer’s parallel port(s).
Page 5
APPENDIX A PATTON MODEL 503P AND 503C SPECIFICATIONS LInes Protected: Model 503P protects 24 lines on the DB-25 parallel interface; Model 503PC protects 34 lines on the 36-pin Centronics® interface. Peak Power Dissipation: 1500 Watts for up to 1 msec Clamp Voltage: 503P 6.8 V;...
Page 8
Dear Valued Customer, Thank you for purchasing Patton Electronics products! We do appreciate your business. I trust that you find this user manual helpful. We manufacture one of the widest selections of data communications products in the world including CSU/DSU's, network termination units, powered and self-powered short range modems, fiber optic modems, interface converters, baluns, electronic data switches, data-line surge protectors, multiplexers, transceivers, hubs, print servers and much more.
Need help?
Do you have a question about the 503P and is the answer not in the manual?
Questions and answers