Establishing A Wireless Connection For The First Time - Casio EX-FR100CA User Manual

Establishing a Wireless Connection for the First Time

The first time you establish a wireless connection between the camera and a
smartphone, you need to use the procedure below to configure wireless connection
settings. This operation is required for the first connection only.
. Smartphone that supports Bluetooth Smart
Connecting the camera to a smartphone using Bluetooth wireless technology
(pairing) makes it simple to configure wireless connection settings.
IMPORTANT!
• Performing this operation automatically configures your smartphone's wireless
LAN connection settings (page 30).
• Your camera can be paired with a single smartphone at one time.
• Some smartphone models may not be compatible with this camera.
• If you want to re-pair the camera with the smartphone it is already paired with, first
unpair them and then pair again. Re-pairing the camera and smartphone will result
in all pending unsent images to remain unsent.
Camera Operation
1.
On the camera, hold down [
off power.
2.
On the camera, hold down [
The camera's operation lamp will flash amber.
Smartphone Operation
3.
Start up the "EXILIM Connect" app.
4.
Tap "Pairing".
5.
On the smartphone, tap the camera's name you want to pair with.
This completes pairing of the camera and smartphone, and establishes a
Bluetooth wireless technology connection.
• In the case of an Android terminal, wireless LAN connection settings are also
configured automatically. In this case, advance to step 9 of this procedure. If
the screen shown in step 9 is not displayed, use the smartphone's Wi-Fi
settings to select the SSID displayed on the camera and establish a wireless
LAN connection between the camera and smartphone.
• In the case of an iPhone (iOS), you need to configure wireless LAN settings
(install a profile) next. Advance to step 6 of this procedure.
] (Power) for about two seconds to turn
] (Power) for at least six seconds.
Controlling the Camera with a Smartphone
28