Establishing A Wireless Connection For The First Time - Casio EX-ZR62 User Manual

Establishing a Wireless Connection for the First Time

The first time you establish a wireless connection between the camera and a
smartphone, you need to use the procedure below to configure wireless connection
settings. This operation is required for the first connection only.
. Smartphone that supports Bluetooth Smart
Connecting the camera to a smartphone using Bluetooth wireless technology
(pairing) makes it simple to configure wireless connection settings.
IMPORTANT!
• Performing this operation automatically configures your smartphone's wireless
LAN connection settings (page 149).
• Some smartphone models may not be compatible with this camera.
• If you want to re-pair the camera with the smartphone it is already paired with, first
unpair them and then pair again. Re-pairing the camera and smartphone will result
in all pending unsent images to remain unsent.
Camera Operation
1.
Display the wireless mode screen (page 145).
2.
Use [8], [2], [4], and [6] to select "Pairing" and then press [SET].
3.
Select "Start" and then press [SET].
Smartphone Operation
4.
Start up the EXILIM Connect app.
5.
Tap "Pairing".
6.
Perform the required connection operation as instructed by the app
and your smartphone.
This establishes a Bluetooth wireless technology connection between the camera
and smartphone.
• For information about how to configure wireless connection settings, refer to
the EXILIM Connect manual (page 145).
Camera Operation
7.
Press [SET].
8.
Select "Enable." if you want to send all images recorded on the camera
to the smartphone, or "Do not enable." if you do not want to send
images to the smartphone. Next, press [SET].
Connecting the Camera with a Smartphone
148
(Wireless Connection)