Casio EX-FR100CA User Manual page 30

. Smartphone that does not support Bluetooth Smart
Configure smartphone wireless LAN connection settings (input the camera SSID and
password).
1.
On the camera, hold down [
off power.
2.
On the camera, while holding down [0] (Movie), hold down [
for more than one second.
The camera's wireless LAN connection lamp will flash blue.
3.
For the smartphone's Wi-Fi settings, enter the camera's SSID and
password to establish a wireless LAN connection between the camera
and smartphone.
When the smartphone establishes a wireless LAN connection with the camera,
the camera's wireless LAN connection lamp lights blue.
• What you need to do to establish a wireless LAN connection depends on the
type of smartphone you are using. For details about how to establish a wireless
LAN connection see the user documentation that comes with your smartphone.
• The camera SSID (which cannot be changed) and password (initial default) are
shown below.
SSID: Refer to the separate "[Important] About the camera's SSID" sheet that
comes with the camera.
Password: 00000000
4.
On the smartphone, start up "EXILIM Connect".
. What to do if you are unable to establish a wireless LAN connection
between the camera and a smartphone.
This problem may be caused when the smartphone is already wirelessly connected to
one of the networks or devices below. Go to your smartphone's Wi-Fi settings and
select this camera's SSID.
– Household wireless LAN
– Public wireless LAN
– Portable wireless LAN device
] (Power) for about two seconds to turn
Controlling the Camera with a Smartphone
30
] (Power)