Table of Contents
Advertisement
To load a memory card
1.
On the camera, hold down [
(Power) for about two seconds to
turn off power, and then open the
[CARD] cover.
2.
Load a memory card.
Positioning the memory card so its back
is facing upwards (towards the lens side
of the camera), slide it into the card slot
all the way in until you hear it click
securely into place.
3.
Close the [CARD] cover.
IMPORTANT!
• Never insert anything besides a supported memory card (page 19) into the memory
card slot.
• Should water or any foreign object ever get into the card slot, immediately turn off
the camera, and contact your retailer or nearest CASIO authorized service center.
. To replace the memory card
Press the memory card and then release it.
This will cause it to pop out of the memory
card slot slightly. Pull the card out the rest of
the way and then insert another one.
• Turn off the camera before replacing the
memory card. Replacing the card while
the camera is on can result in recorded
images not being saved and even damage the memory card.
]
20
Back
Front
Back
Quick Start Basics
Advertisement
Table of Contents
