Table of Contents
Advertisement
6) CABLE TYPES AND SECTIONS
TYPE OF
BURNER
Gas burner
ATTENTION
If the power supply cable is replaced, the installer should leave the ground wire longer than the phase
conductors (fig. 22) and comply with the recommendations given in the installation section.
MAINTENANCE SCHEDULE
Clean the cooktop surface after every use as specified within this manual.
Clean burner top and trivet at least once a week, or after any spillage.
Gas inlet pipes should be checked periodically for leakages (see section on leak testing) a minimum of every
12 months.
Lubrication of gas valves - this can only be performed by an authorised person. It may be required if the gas
tap become stiff and difficult to turn.
19
TYPE OF
CABLE
H05 RR - F
FIG. 22
SINGLE - PHASE
POWER SUPPLY
2
Section 3 X 0.75 mm
Advertisement
Table of Contents
