Blanco CGG302FFC Use, Installation And Maintenance Instructions

Blanco CGG302FFC Use, Installation And Maintenance Instructions

Built-in hot plates

Advertisement

USE, INSTALLATION AND MAINTENANCE
INSTRUCTIONS FOR BUILT-IN HOT PLATES
Dear Customer
Thank you for purchasing a Blanco Cooktop.
Before we continue telling you about this cooktop, we cordially invite you to become part of the Blanco family by
subscribing to ongoing information and invitations. Please visit our website where you can subscribe and request
such things as invitations to future cooking classes and gourmet recipes. Go to www.blanco-australia.com and fill
in the subscription details.
You will find that the clean lines and modern look of your Blanco Cooktop blends perfectly with your kitchen décor.
It is easy to use and performs to a high standard.
Blanco also makes a range of products that will enhance your kitchen such as ovens, rangehoods, dishwashers,
microwaves, sinks and taps.
There are models to complement your new Blanco Cooktop.
Of course we make every effort to ensure that our products meet all your requirements, and our Customer
Relations department is at your disposal, to answer your questions and to listen to all your suggestions (see back
cover of manual).
Please complete the warranty section of this manual and keep your receipt as proof of purchase. Retain all
documents relating to the purchase of this products.
Blanco is committed to providing increasingly efficient products that are easy to use, respect the environment and
are attractive and reliable.
BLANCO
MODELS: CGG302FFC - CGG452FFC
We ask that you carefully read the instructions within this booklet to enable you to abtain quality results from the outset.
The appliance must be installed only by an authorised person in compliance with the instructions provided. The manufacturer
declines all responsability for improper installation which may harm persons and animals and damage property.
The appliance must be used for the purpose for which it was expressly designed. Any other use (eg heating rooms) is considered to
be improper and consequently dangerous. The manufacturer declines all responsability for damage resulting from improper and
irresponsible use.
The manufacturer shall not be held responsible for any inaccuracies in this handbook due to printing or transcription errors. The
designs in the figures are purely indicative.
The manufacturer also reserves the right to make any modifications to the products as may be considered necessary, useful or in the
interests of the user, without jeopardizing the main functional and safety features on the products themselves.
If your cooktop requires service, please contact your local customer service centre or your nearest Blanco agent listed at the back of
this booklet.
CGG604WFFC - CGG704WCP
CGG704WFFCP - CGG705WFFC
CGG905WFFC
COD. 04067GGB - 27.01.2011

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the CGG302FFC and is the answer not in the manual?

Questions and answers

Summary of Contents for Blanco CGG302FFC

  • Page 1 If your cooktop requires service, please contact your local customer service centre or your nearest Blanco agent listed at the back of this booklet.
  • Page 2 DESCRIPTION OF HOBS Natural Propane 1 Ultra rapid gas burner/WOK 17.0 MJ/h 16.2 MJ/h 2 Rapid gas burner 12.0 MJ/h 10.4 MJ/h 3 Semirapid red. gas burner 5.4 MJ/h 4.86 MJ/h 4 Semirapid gas burner 7.1 MJ/h 6.3 MJ/h 5 Auxiliary gas burner 4.1 MJ/h 3.6 MJ/h 7 Cast iron trivet pan support 2F...
  • Page 3 1) BURNERS Power ratings Pan Ø A diagram is screen-printed above each knob on the Burners in cm Natural Propane front panel. This diagram indicates to which burner the knob in question corresponds. After having Ultra rapid/WOK 17.0 MJ/h 16.2 MJ/h 24 ÷...
  • Page 4 Notes: use of a gas cooking appliance produces heat and moisture in the room in which it is installed. The room must therefore be well ventilated by keeping natural air vents clear and by activating a mechanical aeration device (suction hood or electric fan). Intensive and lengthy use of the appliance may require additional ventilation.
  • Page 5 CLEANING IMPORTANT: WARNINGS: always disconnect the appliance from the gas comply with the following instructions, before and electricity mains before carrying out any remounting the parts: cleaning operation. - check that burner head slots “M” (fig. 3) have not become clogged by foreign bodies. - Check that the enamelled burner cap “C”...
  • Page 6: Technical Information For The Installer

    INSTALLATION TECHNICAL INFORMATION 3) INSTALLING THE HOT PLATE FOR THE INSTALLER Check that the appliance is in a good condition after This appliance shall be installed only by authorised having removed the outer packaging and internal personnel accordance with wrappings from around the various loose parts. In manufacturer’s installation instructions, local gas case of doubt, do not use the appliance and contact fitting regulations, municipal codes, electrical wiring...
  • Page 7 INSTALLATION 4) FIXING THE HOT PLATE - When the appliance is installed so that the base can be touched, we recommend fitting a The hot plate has a special seal which prevents protecting shield. This shield must be at least liquid from getting into the cabinet.
  • Page 8: Electrical Connection

    INSTALLATION 5) GAS CONNECTION WARNING: THE BURNER FLAME MUST BE ADJUSTED BY The gas connection is located in the rear and on THE INSTALLER. the underside of the appliance 100 mm from the FAULTY INSTALLATION WILL NOT BE right hand side. COVERED UNDER WARRANTY.
  • Page 9 ADJUSTMENTS 7) TAPS Always disconnect the appliance from the electricity main before making any adjustments. Our taps are suitable for all gas, they are male All seals must be replaced by the technician at conical type. the end of any adjustments or regulations. “Reduced rate”...
  • Page 10: Conversion Procedure

    8) PROPANE GAS TO NATURAL GAS 9) NATURAL GAS TO PROPANE GAS CONVERSION PROCEDURE CONVERSION PROCEDURE Appliance models: Gas stainless steel hotplate Appliance models: Gas stainless steel hotplate models: models: CGG302FFC 2 Burners CGG302FFC 2 Burners CGG452FFC 2 Burners CGG452FFC 2 Burners...
  • Page 11: Replacing The Injectors

    CONVERSIONS 10) REPLACING THE INJECTORS and affix the label corresponding to the new gas regulation on the appliance instead of the already The burners can be adapted to different types of existing one. This label is supplied in the packet gas by installing injectors suited to the type of gas containing the spare injectors.
  • Page 12 SERVICING WARNING: Greasing the taps (see fig. 16) servicing should be carried out only by If a tap becomes stiff to operate, it must be authorised personnel. immediately greased in compliance with the following instructions: 11) COMPONENT REPLACEMENT - remove the tap. NOTE: - Clean the cone and its housing using a cloth BEFORE ANY MAINTENANCE REQUIRING...
  • Page 13 SERVICING CABLE TYPES AND SECTIONS TYPE OF TYPE OF SINGLE - PHASE HOT PLATE CABLE POWER SUPPLY Gas hot plate H05 RR - F Section 3 x 0.75 mm ATTENTION!!! If the power supply cable is replaced, the installer should leave the ground wire longer than the phase conductors (fig.
  • Page 14: Technical Assistance And Spare Parts

    TECHNICAL ASSISTANCE AND SPARE PARTS BLANCO CUSTOMER SERVICE 1300 739 033 www.meaappliances.com.au SALES OFFICES AND SHOWROOMS SERVICE AND SPARE PARTS NEW SOUTH WALES. QUEENSLAND. Head Office, Sales and Marketing Brisbane. 104 Vanessa Street. Endeavour Refrigeration and Appliance Service. Kingsgrove. Telephone: 07 3137 3633 NSW 2208.
  • Page 15: Warranty Section

    3. Should service be required under this Warranty, the good order and working condition, the purchaser shall be purchaser should contact an approved BLANCO Service liable for a service fee charged by BLANCO/MEA or one Provider during their normal business hours. of its’ Service Providers.

Table of Contents