IDEAL 3915-95 Operating Instructions Manual
  1. Manuals
  2. Brands
  3. IDEAL Manuals
  4. Cutter
  5. 3915-95
  6. Operating instructions manual

IDEAL 3915-95 Operating Instructions Manual

Electric guillotine
Hide thumbs Also See for 3915-95:
Table of Contents

Advertisement

Quick Links

GB Operating Instructions
Guillotines
IDEAL 3915-95

Advertisement

Table of Contents
loading

Related Manuals for IDEAL 3915-95

Summary of Contents for IDEAL 3915-95

  • Page 1 GB Operating Instructions Guillotines IDEAL 3915-95...
  • Page 2 • • • Ìåðû ïðåäîñòîðîæíîñòè Środki bezpieczeństwa IDEAL 3915-95 Bitte lesen Sie vor Inbetriebnahme der Maschine unbedingt diese Betriebsanleitung und beachten Sie die Sicherheitshinweise. Die Betriebsanleitung muss jederzeit verfügbar sein. Please read these operating instructions before putting the machine into operation and observe the safety precautions.
  • Page 3 • • • Sicherheitshinweise Safety precautions • • • Consignes de sécurité Veiligheidsvoorschriften • • • Misure di Sicurezza Normas de Seguridad • • • • Säkerhetsföreskrifter Turvallisuusohjeita Sikkerhetsforskriftene • • • Ìåðû ïðåäîñòîðîæíîñòè Środki bezpieczeństwa Keine Bedienung durch Kinder! GB Children must not operate the machine! Pas d‘utilisation par un enfant! Geen bediening door kinderen!
  • Page 4 Turvallisuusohjeita Sikkerhetsforskriftene • • • Ìåðû ïðåäîñòîðîæíîñòè Środki bezpieczeństwa IDEAL 3915-95 Messer nie lose liegen lassen! Messer nur mit Messerwechselvorrichtung oder im Messertransportkasten befördern! (siehe Seite 23 und 25). Warnung! Verletzungsgefahr! GB Never leave the blade unattended! Do not extract or transport the blade without protection! (See page 23 and 25).
  • Page 5 • • • Sicherheitshinweise Safety precautions • • • Consignes de sécurité Veiligheidsvoorschriften • • • Misure di Sicurezza Normas de Seguridad • • • • Säkerhetsföreskrifter Turvallisuusohjeita Sikkerhetsforskriftene • • • Ìåðû ïðåäîñòîðîæíîñòè Środki bezpieczeństwa DK Knivbladet må aldrig efterlades uden opsyn. Forsøg ikke at afmontere eller transportere knivbladet uden beskyttelse! (Se side 23 og 25) FARE! Risiko for legemlig beskadigelse.
  • Page 6 • • • Ìåðû ïðåäîñòîðîæíîñòè Środki bezpieczeństwa IDEAL 3915-95 Keine harten und splitternden Materialien schneiden! GB Do not cut hard materials or materials which may splinter! La coupe de matériaux trop durs ou risquant des projections est interdite ! Snij geen harde materialen of materiaal dat kan splinteren!
  • Page 7 • • Safety precautions The machine is designed for cutting stacks of paper to a specified size. This machine is constructed for "one-man operation" only! Disconnect from the mains before starting any service work or before removing the panels! Replacement of blade and cutting stick may be performed only when the main switch is switched off! - 7 -...
  • Page 8 • • Safety precautions IDEAL 3915-95 All components which could endanger the operator are covered by a guard! Operating the machine without safety device is forbidden! (Front safety guard (A), rear screwed safety guard (B) and panel (C). - 8 -...
  • Page 9 • • Safety precautions The dangerous cutting movement is safeguarded by a movable guard (A) and a safety two-handed control system! (B) Before working with the machine and after every blade replacement the automatic cut-off function of safety guard (A),(correct if distance between cover and table is <...
  • Page 10 • • Safety precautions IDEAL 3915-95 Protect mains cable against heat, oil and sharp edges! Connect the power cord to a single phase 230V / 10A min socket 115V / 15A min Ensure free access to mains - 10 -...
  • Page 11 • • Safety precautions When not in use for a longer period switch off. (Main switch to "0"). - 11 -...
  • Page 12 • • Installation IDEAL 3915-95 Unpack the cabinet (A), (accessories) or stand (B), (accessories) and assemble according to the enclosed separate instructions. 2 strong people are required to lift the machine onto the cabinet or stand. Beware of fingers! Risk of injury!
  • Page 13 • • Installation Screw on the backgauge crank (A) and the handle (B) found in the tool set (C). Plug into socket. The machine must be connected directly to the socket. - 13 -...
  • Page 14 • • Operation IDEAL 3915-95 It is forbidden to operate the machine if the operating and safety instructions have not been understood. Please check the safety devices upon their function and completeness before working with. • All covers have to be mounted (A).
  • Page 15 • • Operation Operating elements - Front safety guard - Safety two-handed control system - Overload switch - Clamping - Main switch - Backgauge crank - Key switch - Backgauge - Side lay left Position the main switch to "I" (A). Insert the key for the control system and move it to the right (B).
  • Page 16 • • Operation IDEAL 3915-95 The backgauge has to be adjusted by the handle with calibration ring (A). Measurement has to be adjusted from the rear. Measurement is indicated on the back side lay (A). (mm/inch). The fine adjustment is achieved by using the calibration ring (B).
  • Page 17 • • Operation Optical cutting line (A) that indicates the exact position of the cut. Blade cuts on the front edge (B) of the light beam. (Only use when no exact cut is required). Pull out the handle to avoid the measurement being wrongly adjusted.
  • Page 18 • • Operation IDEAL 3915-95 Position the paper on the back gauge (A) and side lay (B). To move paper stacks, please use the paper knock-up block (C). (Run backgauge (A) to the front for turning the paper stack). Close the safety guard.
  • Page 19 • • Operation Before every cut the lever must be pushed to the left and tightened with light pressure. Cutting activation: Press both buttons of the two-handed control system (A) simultaneously and keep them pressed until the paper is completely cut. To interrupt or stop cutting: To interrupt or stop cutting, release both buttons (A) of the two-hand control.
  • Page 20 • • Blade and cutting stick replacement IDEAL 3915-95 If the cutting quality decreases: • Check the cutting depth (see page 28). • Check the cutting stick (see page 24). • Replace or grind the blade (see page 20 - 28).
  • Page 21 • • Blade and cutting stick replacement Turn the blade depth adjustment screw to the left until it stops (Screwdriver found in tool set). Close the safety guard (1.). Lower the blade by pressing both cutting buttons (2.). Keep one button pressed and turn off the main switch (3.).
  • Page 22 • • Blade and cutting stick replacement IDEAL 3915-95 The 3 eccentrics are now exposed and should be turned counter clockwise to position "0" with the special wrench (A) (found in tool set). Until the red arrow-like eccentric marking corresponds to the position "0" (B).
  • Page 23 • • Blade and cutting stick replacement Position the main switch to "0" (1.) Remove the 2 blade screws on the elongated holes (2.). Then put the blade changing tool into place and fasten it to the blade (3.). The remaining screws should then be removed (1.).
  • Page 24 • • Blade and cutting stick replacement IDEAL 3915-95 If needed the cutting stick can be turned or exchanged. (The cutting stick can be used eight times). - 24 -...
  • Page 25 • • Blade and cutting stick replacement Take the exchange blade carefully out of the blade box and screw it to the blade changing tool (A) • make sure there is a space ot 5 mm or 0.20 inches (B). •...
  • Page 26 • • Blade and cutting stick replacement IDEAL 3915-95 Lightly tighten 3 of the 5 blade screws (1.) (with washers), remove the blade changing tool (2.) and lightly tighten the remaining blade screws (with washers) (3.). Remove all tools and distribute paper along the entire cutting length.
  • Page 27 • • Blade and cutting stick replacement Close the safety guard (1.) Lower the blade by pressing both cutting buttons (2.). Keep one button pressed and turn off the main switch (3.). Open the safety guard (4.). With the special wrench (B) the 3 eccentrics shall be screwed so far down (5.)until the paper is cut along the entire length of the blade (The blade must...
  • Page 28 • • Blade and cutting stick replacement IDEAL 3915-95 Paper cutting test. If the last sheet or several sheets are not completely cut, gradually turn the knob for blade depth adjustment (A) ¼ turn to the right until the paper is cut along the entire length.
  • Page 29 • • Maintenance and cleaning Maintenance work may only be performed by trained staff. Danger! Disconnect the mains before starting any service work or before removing the cover. Oil the backgauge (A) control weekly i.e. grease it. (Use non-resinous oil and grease). Twice a year the remaining 14 grease parts (B) (see picture).
  • Page 30 • • Maintenance and cleaning IDEAL 3915-95 Safety test The safety regulations are according to the regulations of the country where the cutting machine is operated. The manufacturer recommends a safety check is made every 5 years by an authorised service team.
  • Page 31 • • Possible malfuntions Machine does not function Is the machine plugged in? Main switch to position "I"? Control system activated? (Turn key to the right) Release a cut see page 19. - 31 -...
  • Page 32 • • Possible malfuntions IDEAL 3915-95 Cut cannot be made. • If cover is open: close • If cover is closed: open and re-close it. (Security check). • Check the units fuse and the on-site circuit breaker! Machine turns off: •...
  • Page 33 • • Possible malfuntions Does not cut through the last sheet: • Turn or turn around the cutting stick (A), readjust the blade by means of the blade adjusting knob (B). (see page 28). Poor cutting quality or blade stays in the paper stack.
  • Page 34 • • Possible malfuntions IDEAL 3915-95 Motor runs but blade does not move downwards. • Security brake has been activated! Inform the service team! IDEAL "Service" None of the above mentioned methods helped to solve the problem: Contact Service team under www.ideal.de...
  • Page 35 • • Accessories Recommended Accessories: Blade Nr. 9000 115 Cutting stick (6 pieces) Nr. 9000 215 Paper knock-up block Nr. 9000 520 Blade changing tool Nr. 9000 510 Cabinet Nr. 3915 1100 Stand Nr. 3905 1100 Included in delivery. - 35 -...
  • Page 36 • • Technical data IDEAL 3915-95 Technical data: • Power supply: 230V/50Hz/1~, 115V/60Hz/1~ • Cutting length: 390 mm • Cutting height: 40 mm • Table depth: 390 mm • Sound level EN 13023: 71 dB (A) • Minnimum space requirement (width x depth x...
  • Page 37 • • Technical data This machine is approved by independent safety laboratories and is in compliance with the EC-regulations 98/37/EC, 2006/95/EC and 89/336/EC. Sound level information: The sound level is 71 db (A) as defined by EN 13023. Subject to alteration without notice. - 37 -...
  • Page 38 IDEAL 3915-95 EG-KONFORMITÄTSERKLÄRUNG EC-declaration of conformity Déclaration de conformité CE EG-verklaring van overeenstemming Dichiarazione CE di conformità Declaración CE de conformidad Ñåðòèôèêàò Ñîîòâåòñòâèÿ ÅÑ Ñåðòèôèêàò Ñîîòâåòñòâèÿ ÅÑ Ñåðòèôèêàò Ñîîòâåòñòâèÿ ÅÑ Ñåðòèôèêàò Ñîîòâåòñòâèÿ ÅÑ Ñåðòèôèêàò Ñîîòâåòñòâèÿ ÅÑ - Hiermit erklären wir, daß die Bauart von - Herewith we declare that - Par la présente, nous déclarons que...
  • Page 39 Remarks: - 39 -...
  • Page 40 IDEAL • Made in Germany Document Shredders Trimmers and Guillotines • • • • • IDEAL Krug & Priester 72336 Balingen Germany www.ideal.de...

Table of Contents