IDEAL 3915-95 Operating Instructions Manual page 16

IDEAL 3915-95
A
The backgauge has to be adjusted by the
handle with calibration ring (A). Measurement
has to be adjusted from the rear.
A
Measurement is indicated on the back side
lay (A). (mm/inch).
The fine adjustment is achieved by using
the calibration ring (B). The scale is divided in
mm (One complete turn corresponds
10 mm = 1 cm).
See example cutting measurement 208,50 mm
B
Example: Cutting measurement 208,50 mm
- 16 -
• •
Operation