Replacing The Fuse - Razor POCKET MOD BELLEZZA Owner's Manual

REPAIR AND MAINTENANCE
Front Wheel Replacement
Tools Required: (2) 15 mm Wrenches
1
Using two (2) 15 mm wrenches,
remove the locknuts and lock
washers on both sides of the front
wheel, then remove front wheel.

Replacing the Fuse

Tools Required: Phillips Screwdriver
Turn power switch OFF.
1
Open up seat and loosen the four (4) Phillips screws located
inside the storage compartment and remove tray.
2
Locate fuse box on top of
batteries. Open the fuse cover to
expose the fuse.
Need Help? Visit our web site for replacement parts, product support, a list of authorized service centers in the US and customer service contact information
at www.razor.com. Please have the product I.D. code (located on the white label of your product) available for better assistance. Additional Customer Service
contact information is listed at the back of this manual.
2
Insert replacement wheel into
the front fork.
30 Amp
3
Remove the fuse and replace
with a new one of equal amperage.
Close fuse box. Reattach storage
compartment.
3
Re-insert the tab on the lock
washers into the holes on the front
fork and tighten the locknuts on
both sides of the wheel.
10
WARNING:
To prevent shock, please follow the
instructions accordingly and do not
skip or combine any steps.