Razor POCKET MOD BELLEZZA Owner's Manual page 7

ASSEMBLY AND SET -UP
Checking Spoke Tension
Spoke
Flange
Spoke
Nipple
1
Verify spoke tension by grasping and shaking each spoke. Spoke
should not be loose from hub. Look for any play between spoke flanges
where it mates with hub. Try to turn nipple using your fingers. You
should not be able to spin any nipple by hand. If one or more spokes
are loose, or if you can turn any nipple using your fingers, all spokes
must be checked and need to be tightened with a spoke tightener.
Inflating the Tires
Tires are inflated when shipped, but they invariably lose some pressure between the point of manufacturing and your
purchase. Inflate the tires to the correct PSI before first time use.
Lower air pressure can result in a shorter ride time.
Periodically check both tires. Reinflate when needed.
Using a bicycle tire pump equipped
for a Schrader valve, inflate the tires
to the PSI indicated on the sidewall
of the tires.
16
17
8
18
7
19
6
20
5
1
2
4
3
2
Start with spoke closest to tire
valve and tighten each nipple. In
sequence, exactly 1/4 to 1/2 turn.
A single 1/4 to 1/2 turn may not
be enough to bring the spokes into
proper tension. Continue tightening
all spokes in sequence, no more than
1/2 turn until all spokes are tight.
6
WARNING: Regularly
check the spoke tension and
retighten the spokes whenever
loose. If you have any doubt, ask
an experienced motorcycle or
bicycle mechanic to inspect your
spokes to determine if the spokes
need tightening or adjusting.
Note: Tightening each nipple more
than a 1/2 turn each can cause
the wheel to become distorted
and wobbly, thus permanently
damaging the wheel.
Note: The pressurized air supplies
found at gasoline stations are
designed to inflate high-volume
automobile tires. If you decide to
use such an air supply to inflate
your Pocket Mod Bellezza tires,
first make sure the pressure gauge
is working, then use very short
bursts to inflate to the correct PSI.
If you inadvertently over-inflate
the tires, release the excess
pressure immediately.