Glossary - Test Equipment Depot Net Prowler TNP700 User Manual

Identify, monitor & test lan issues
Table of Contents

Advertisement

GLOSSARy

Open
Wires/Cable Pairs do not have continuity throughout the cable or the Net
Prowler remote is not detected.
Short
Wires/Cable Pairs are making an electrical connection with each other or
foreign object.
Split
A cable that has been correctly wired pin to pin at both ends, but not in
correct color code.
When this happens, signals from one circuit pair becomes cross coupled
with another that creates signal corruption and slow data speed symptoms.
MDI
Straight Cable connection: Pin 1 and 2 used for receiving data, Pins 3 and 6
used for transmitting data.
MDI-X
Crossover Cable connection: Pin 3 and 6 used for receiving data, Pins 1 and
2 used for transmitting data.
FDX
Link is Full Duplex.
HDX
Link is Half Duplex.
Rev
Data polarity is reversed.
Link Flow Control
Flow control is enabled. Link Flow Control is a pause in data transmission
when there is system congestion.
Ping Test
Ping is a network utility that verifies communication between devices by
sending and receiving ICMP packets.
26

Advertisement

Table of Contents
loading

This manual is also suitable for:

Net prowler tnp850k1

Table of Contents