Table of Contents
Advertisement
Link Light
The Link Light test is used to help identify a hub or switch port.
Power on the Net Prowler.
•
Connect the Net Prowler to an active Network cable or port.
•
Press the Network/PoE soft key
•
soft key
The Link Light will automatically begin upon entering the Link
•
Blink menu.
The Link LED above the LCD screen will flash at the same cadence
•
as the port light.
Use the up and down arrows to adjust the transmit frequency to suit
•
the switch characteristics.
Test Equipment Depot - 800.517.8431
99 Washington Street Melrose, MA 02176
.
TestEquipmentDepot.com
then press the Link Light
20
Advertisement
Table of Contents
