Rear Suspension-Rear Stabilizer Bar - Ford Transit 2002 Owner's Manual

Rear Suspension - Rear Stabilizer Bar
Removal and Installation
NOTE: Note the position of each component before removal.
NOTE: Make sure that these components are installed to the noted removal position.
Transit/Tourneo Connect 2002.5 (06/2002-)
Removal
1. Raise and support the vehicle.
For additional information, refer to:
(100-02 Jacking and Lifting, Description and
Operation) /
Lifting (100-02 Jacking and Lifting, Description
and Operation).
NOTE: Use a 6 mm Allen key to prevent the
2.
ball joint from rotating.
Detach the stabilizer bar connecting link from the
stabilizer bar on both sides.
Discard the retaining nuts.
3. Remove the stabilizer bar clamp on both sides.
4. Remove the stabilizer bar.
5. Remove the stabilizer bar bushings.
Installation
1. CAUTIONS:
Do not lubricate the stabilizer bar
bushings.
The stabilizer bar bushings must be
positioned as shown.
Install the stabilizer bar bushings.
http://vnx.su
Print
Jacking