Warranty Information - Evinrude E-TEC G2 Operator's Manual

BRP US Inc. Limited Corrosion Warranty For Evinrude® E-TEC® G2™
Engines
What is covered: BRP US Inc. (BRP) warrants that each new Evinrude® E-TEC® G2™ engine sold by
authorized Evinrude dealers ("Product") will not be rendered inoperative as a direct result of corrosion for
the period of time described below.
Duration of coverage: This limited corrosion warranty will be in effect from the date of delivery to the first
retail consumer or the date the Product is first put to use, whichever occurs first, for a period of five (5)
years. The repair or replacement of parts, or the performance of service under this limited corrosion war-
ranty, does not extend the life of this limited corrosion warranty beyond its original expiration date. Unex-
pired warranty coverage can be transferred to a subsequent (non-commercial use) purchaser upon proper
registration of the Product.

Warranty Information

Conditions required for warranty coverage:
This limited corrosion warranty is available only if each of the following conditions has been fulfilled:
The Product must be purchased as new and unused by its first owner from an authorized
– Evinrude® dealer ("Dealer") authorized to distribute products in the country in which the sale
occurred;
The BRP specified pre-delivery inspection process must be completed and documented and
–
signed by the Dealer and the purchaser ("Owner");
– The Product must have undergone proper registration by a Dealer;
The Product must be purchased in the country in which the Owner resides;
Corrosion prevention devices specified in the Operation and Maintenance Manual must be in use
–
on the boat; and
Routine maintenance outlined in the Operator's Guide and Service Manual must be timely
performed (including, without limitation, the replacement of sacrificial anodes, use of specified
– lubricants, and paint touch-up of nicks and scratches) in order to maintain warranty coverage.
BRP reserves the right to make warranty coverage contingent upon proof of proper maintenance
by a Dealer.
Exclusions: The following are not warranted under any circumstances:
Corrosion damage caused by stray electrical currents (on-shore power connections, nearby
–
boats, submerged metal).
– Damage caused by improper application of copper base anti-fouling paints.
– Electrical system corrosion;
– Corrosion resulting from damage,
– Corrosion which causes purely cosmetic damage,
– Abuse, or improper service;
– Corrosion to accessories, instruments, steering systems;
– Damage due to marine growth;
– Replacement parts (parts purchased by Owner);
Products used in a commercial application. Commercial use is defined as any work or
– employment related use of the Product, or any use of the Product which generates income, for
any part of the warranty period, even if the Product is only occasionally used for such purposes.
If anti-fouling protection is required, Bis (tributyltin) adipate (TBTA) base anti-fouling paints are recom-
mended on Evinrude® engine boating applications. In areas where TBTA base paints are prohibited by
law, copper base paints can be used on the hull and transom. Do not apply paint to the Product. In addi-
tion, care must be taken to avoid an electrical interconnection between the Product and the paint.
64