CAME A 3000 Installation Manual
Automation for swing gates
Hide thumbs
Also See for A 3000:
- Installation manual (81 pages) ,
- Installation manual (49 pages) ,
- Installation manual (15 pages)
Related Manuals for CAME A 3000
Summary of Contents for CAME A 3000
- Page 1 AUTOMATION 11 9 D49 EN FOR SWING GATES INSTALLATION MANUAL A 3000/3006/3100/3106 A 5000/5006/5100/5106 English...
-
Page 2: Read Carefully
• Use this product only for the specifi c purpose for which it is designed. Any Special instructions and recommendations for everyone other use is therefore improper and dangerous. CAME Cancelli Automatici • Keep away from the hinges and any moving mechanical parts • Stay out S.p.A. -
Page 3: Legend Of Symbols
But whereas with reversible operators it is merely advisable, with irreversible ones, beyond 4 m, it is obligatory. 3 Reference Standards For its quality processes management Came Cancelli Automatici is ISO 9001 certified, and for its environmental management it is ISO 14001 certified. -
Page 4: Installation
2) Front bracket 3) Back swivel-joint 4) Back bracket 5) Anchoring plate 4.4 Overall dimensions A 5000/5006/5100/5106 A 3000/3006/3100/3106 Travel Travel 5 Installation 5.1 Preliminary checks Before installing, do the following: • make sure the structure of the gate is sturdy, the hinges work and that there is no friction between moving parts and non-moving parts;... -
Page 5: Standard Installation
5.2 Tools and materials Make sure you have all the tools and materials you will need for the installation at hand to work in total safety and compliance with the current standards and regulations. 5.3 Cable list and minimum thickness Length of cable Length of cable Length of cable... - Page 6 5.5 Mounting The following applications are only examples, in that the space available for fixing the operator and accessories varies depen- ding on the dimensions. It is thus up to the installer to choose the most suitable solution. Tab. 3 Pillar Leaf - closed posi- Gate leaves <...
- Page 7 Anchoring plate Level the bracket Front bracket With the gate closed apply the anchoring plate to the gate leaf, making sure that the front bracket is lined up horizontally with the back bracket and ensuring that measurement E is met. Carter Unscrew the two screws and remove the carter.
- Page 8 5.6 Release with customised key Only for: A3000/A3006 Door A5000/A5006 Release only with motor stopped: 1) raise the door; 2) insert and turn key which immediately releases door; 3) manually push or pull gate leaf. To lock gate leaf again into place just insert key again and turn. 5.7 Adjusting opening STOP microswitch Microswitch actuating sled Microswitch...
- Page 9 5.8 Connecting to the ZA3N/ZM3E control panels Connecting 2 motors Connecting 1 motor...
- Page 10 5.9 Application for outward opening Tab. 4 A3000-3006 A5000-5006 3100-3106 5100-5106 130 mm 200 mm 130 mm 200 mm 720 mm 920 mm Outward Inward Extra bracket - Measure values A and B (Tab. 4) - Secure the tail bracket to an extra bracket and apply to post. - Open gate (max 90°), measure value E (Tab.
-
Page 11: Phasing Out And Disposal
CAME CANCELLI AUTOMATICI S.p.A. employs a UNI EN ISO 14001 certified and compliant environmental protection system at its plants, to ensure that environmental safeguarding. We ask you to keep protecting the environment, as CAME deems it to be one of the fundamental points of its market operations strategies, by simply following these brief guidelines when disposing: DISPOSING THE PACKING MATERIALS The packing components (cardboard, plastic, etc.) are solid urban waste and may be disposed of without any particular difficulty, by... - Page 12 CONTROL PANEL 319S63EN FOR 230 V OPERATORS INSTALLATION MANUAL ZF1N...
- Page 13 The overall power load of the connected operator must not exceed 320 W. 3 Reference standards Came Cancelli Automatici employs an ISO 9001:14001 certified quality management system and an ISO 14001 environmental management system. Came entirely engineers and manufactures in Italy.
- Page 14 4.1 Dimensions 4.2 Main components Connecting terminals 5A line fuse 3.15 A accessories fuse Buttons to memorise radio code Trimmer for adjusting the delay of operator 2 Working time adjuster trimmer Automatic closing time adjuster trimmer Functions selector Radio frequency card socket Operator torque limiter Transformer Connect the black wires protruding from...
- Page 15 5 Installation 5.1 Preliminary checks Before beginning to install, the following is necessary: • Make sure that the point where the electrical panel is anchored is free from any impacts, and that the surface is solid and that proper tools and materials are used (i.e. screws, wall plugs, etc.). •...
-
Page 16: Electrical Connections
6 Electrical connections Operator Operator 1 delayed when opening Operator 2 delayed when closing FERNI FERNI FAST FAST KRONO KRONO U V W X Y E Power supply 11 10E L1 L2 Terminals for powering the Power supply to the 24V AC accessories. - Page 17 Warning devices Flashing light (contact rated for: 230V AC - 25W Max.) Flashes while gate opens and closes. U V W X Y E Gate open warning light Contact rated for: 24 V - 3 W Max.) Warns of open gate position, turns off when gate is closed. 11 10 Safety devices Delta-S...
-
Page 18: Selecting Functions
Command devices Stop button ((N.C.) contact.) Gate stop button with exclusion of automatic closing, to resume movement press command button or transmitter button. If unused, short-circuit contact 1-C2. if unused Key switch selector and/or command button (N.O. contact) Commands for opening and closing, by pressing the button or turning the selector switch key. -
Page 19: Activating The Radio Command
9 Motor torque limiter To change motor torque, move the faston (the one with the black wire) to one of the four settings; 1 min. - 4 max. 1 2 3 4 L1TL2TCT 0 12 24 10 Activating the radio command Antenna Connect RG58 antenna cable to the apposite terminals. - Page 20 see instructions on box TOUCH TCH 4024 • TCH 4048 TOP-432A • TOP-434A TOP-432NA • TOP-434NA TOP-302A • TOP-304A TOP-862NA • TOP 864NA TOP-432S TWIN T132 • T134 • T138 TWIN 2 • TWIN 4 T432 • T434 • T438 T152 •...
- Page 21 Memorisation 1) Keep pressed the "CH1" button on the control board (the LED light flashes). PROG Flashing LED AF radio frequency card 2) The transmitter button sends the code, and the LED will stay on to signal that memorisation was successful. PROG LED on AF radio frequency card...
-
Page 22: Dismantling And Disposal
UNI EN ISO 14001 standard to ensure environmental protection. Please help us to safeguard the environment. At CAME we believe this to be one of the fundamentals of our market operations and development strategies. Just follow these short disposal instructions: DISPOSING OF THE PACKAGING The components of the packaging (i.e.